Sunday 24 November 2013

unbrick XOLO Q700 & Q700i

1 comment
XOLO officially has released the update for XOLO Q700 and it supports Over the air (OTA) updates as previous ....
Please get the updated rom on XDA so we can flash it at our homes 

JOIN OUR XOLO Q700 FB Group

WHATS NEW ???
Quote:
Data Partionted
Camera qulity and stability
Loudspeaker improvement
REQUIREMENTS
Quote:
• A XOLO Q700 with usb data cable
• Please ensure that the battery of your device is above 75%, so you don't get sudden shut down during our process.
• Take full backup of your device.
• Backup data like SMS, contacts, whatsapp data etc etc., as these would be formatted during the process.
• Install the drivers >> DOWNLOAD
• Download ROM >> DOWNLOAD
SP FLASH TOOLS, that you will flash. >> Download

If sp tool gave error try this
http://forum.xda-developers.com/show...php?p=46206449


INSTALLATION:

Quote:
1. Install drivers - Mobistel_Cynus_T1_Drivers_x86
2. Open SP_Flash_Tool_v3.1328.0.183
3. Select Scatter file from the downloaded ROM version 4.2.1 (extract downloaded file from winrar to different folder)and select all files.
4.Goto options->select usb & select USB Mode& DA Download All - & select force to High Speeds
5. Remove battery, Sim Cards & Memory Card
6. Press Firmware Upgrade (Don’t press download)
7. Insert USB data cable to PC & connect your phone & flash tool will detect your phone& downloadingstart automatically
8. When you see green circle than you are done.
9. Remove the cable from your phone insert battery & restart your phone.
10. You are done& you can insert sim cards & memory card.

FLASHING ROM

[SIZE="2"]THE images from other device.. don't Worry .. its only for your help[/SIZE]


1)Install Drivers.

2)Open SP tool



3)Select 'Android Scatter file' inside ROM folder.




4)Now Shut_Down XOLO Q700

5)Click Firmware_Upgrade Button.[DONT PRESS DOWNLOAD]




6)Connect Phone{Switched off} to PC via USB Cable.

7)If everythings right,Flashing will proceed..

8)Wait till It finishes..A green ring is displayed on completion..

9)Now Close SP tool..Remove Phone from PC..

10)Switch ON the phone...It is successfully Flashed...

1 comment:

  1. Plzz help
    I had MIUI 5.1.11 running on xolo q700 using metos tool I selected 2.77 as internal storage leading to a soft brick now phone stucks at miui boot logo. I also enter cwm cleared data cache and dalvik and reflashed miui but still no luck. Also in cwm advanced I I partition sd card to again 2048mb and swap partion to 0mb
    Later I Tried usning Sptools and mobistel cynus t1 x86 drivers to flash xolo q700i rom but sptools is not detecting my cell plz help

    ReplyDelete

DID YOU TRY THIS ??

HOWZ IT IS ?